Cart 0 x

Addison TX Heating Repairs – Furnace Troubleshooting

Addison TX Heating Repairs – Furnace Troubleshooting

If your furnace system has stopped working, it is time to call Addison TX heating repairs. Although you do furnace troubleshooting to identify problems, it is best to contact an expert technician who can diagnose, analyze, and fix the issues professionally and reliably. After all, you want the system to work properly and avoid frequent repairs.

Do you have trouble with the furnace system? If yes, let us tell you that you are not alone. Fortunately, many furnace problems have easy DIY solutions. For instance, the first is always to check whether your heating system has power. You don’t have to be an expert in flipping a switch at the circuit breaker box. If power is not the issue, it is crucial to check other possible glitches before you call Addison TX heating repairs.

Furnace troubleshooting is an excellent way to identify problems with your heating system. In today’s article, we will talk about common furnace problems and solutions. Before we tell you about them, it is important to understand that you should check the furnace’s manual to ensure you are not voiding the warranty. Read on!

Malfunctioned Thermostat

If your furnace system is not producing heat, try changing the thermostat batteries. Most furnace systems with programmable thermostats have batteries. If the batteries are working properly and not causing the problem, clean the thermostat’s internal components using a small paintbrush.

You can also restart the thermostat to see if it fixes the problem. Ensure the thermostat is set to “Heat” Mode and the temperature is slightly above the room temperature. Turn the breaker switch off for at least 30 seconds and then turn it back “ON.”

If furnace troubleshooting does not help you and the problem persists, call a professional Addison TX heating repairs. Air Repair Pros has experienced technicians with profound knowledge of thermostats. We can fix both non-programmable and programmable thermostats.

The furnace does not turn “ON.”

If your furnace system is not turning “ON,” check the emergency shutoff switch. It is usually located at the front or back of the furnace closet. Sometimes, it is also located at the top of your basement stairs.

If the switch is “OFF,” you can turn it “ON” to solve the problem. If the issue does not solve, you can call Air Repair Pros. We will send a technician to inspect the system and come up with the best solutions.

Dirty Air Filters

Failing to clean or replace dirty air filters can lead to a wide range of problems, including higher energy bills. If you want to ensure the system works fine, it is best to clean the filters. One of the best furnace troubleshooting tips is to check the air filters. If they are dirty, dusty, or clogged, change them immediately.

Experts at Air Repair Pros recommend Addison, TX, homeowners to replace the filters every month. That way, the furnace system will distribute warm air without putting pressure on its internal components.

No Ignition

If your furnace clicks but does not turn “ON,” the problem can be ignition or pilot. If you have inspected the thermostat, changed the filter, and checked the power, the ignition sensor or the pilot light is likely the issue.

Turn off the gas to your heating system and then remove the front panel to find the ignition sensor. You will find it near the burners. Make sure you take a photo of the sensor so that you know its position and attachment assembly. Remove the ignition sensor and use a small brush to remove residue. Clean it properly so that you do not damage it.

Put it back and replace the panel before you turn “ON” the gas again. Although this is a good furnace troubleshooting tip, most homeowners find it difficult to carry out the project themselves. In that case, call a professional Addison TX heating repairs.

The Importance of Furnace Maintenance

You may not know, but furnace maintenance is very important for its optimal function. A well-maintained HVAC system can protect you from costly and emergency repairs. Most often, homeowners ignore maintaining their heating systems, which leads to bigger problems.

That’s why they end up paying more for expensive repairs. Likewise, if you continue ignoring the furnace maintenance, the system will consume more energy and work hard to maintain an indoor space’s optimal temperature.

Remember, if your furnace system works hard, it can undergo a wide range of wear and tear, causing significant damage to the internal components. Benefits of furnace maintenance before or at the start of the winter season include:

  • Energy Savings
  • Increased Comfort
  • Enhanced Air Quality
  • Extended Equipment Lifespan
  • Improved Safety
  • Lower Cost of Repairs
  • Reliability
  • Maintains Manufacturer’s Warranty

If you are looking for a professional Addison TX heating repairs Service to repair and maintain your heating system, call Air Repair Pros today!

Comments(0)

Write a comment

X