Southlake TX Furnace Repairs - Furnace Not Producing Heat! | Air Repair Pros
ARPOC-2021-Feb-13

Southlake TX Furnace Repairs – Furnace Not Producing Heat!

Most homeowners call Southlake TX furnace repairs when their furnace system does not work properly. A furnace not producing heat can affect your indoor space and disturb your family’s comfort. Is your furnace not producing heat? Here are some solutions.

Open the Heat Registers

Closed heat registers can lead to several problems, including the furnace not producing heat. Blocked heating vents can cause the furnace to consume more energy and work hard to maintain the indoor space’s temperature.

Blocking air increases pressure in the air ducts and cause airflow leaks. Experts at Air Repair Pros recommend at least 80% of the heat registers open to avoid building up unnecessary air in the heating system and ducts. If you don’t know how to open the heat registers, call Air Repair Pros, a professional Southlake TX furnace repairs service.

Check Your Thermostat

Another reason your “furnace not producing heat” is that the thermostat is set to cool and not heat. In that case, set the thermostat to heat and the fan to Auto mode. The thermostat temperature setting should be slightly higher than the current room temperature.

If the thermostat is properly set and the furnace not producing heat, the problem is due to batteries. Make sure the thermostat is getting enough power by checking batteries, circuit breakers, and fuses. Call a professional Southlake TX furnace repairs to clean the internal parts of the thermostat.

Check the Furnace Power

Once you have verified that the thermostat settings are correct, the next step is to check whether the furnace is getting power. You can check the circuit breakers and fuses to ensure the furnace system is getting power.

Likewise, it is crucial to check the electrical switches and ensure they are in the “ON” position. If the problem persists, contact Air Repair Pros, an experience Southlake TX furnace repairs company.

Reset the Furnace

Resetting the heating system can solve the problem of the furnace not producing heat. You can find the reset button on the front, back, or side of the furnace. The button controls the automatic “ON” and “OFF” feature of the furnace system. A furnace not producing heat is also due to its short-cycling, clogged air filter, and blocked ducts. A professional technician can solve these problems adequately.

Check the Air Filters

A furnace not producing heat is most often due to dirty air filters. A dirty and clogged filter can restrict the airflow through the heating system and cause it to overheat. As a result, the system will shut off automatically.

Change the air filter if you notice dirt, dust, or debris in it. Experts at Air Repair Pros recommend changing air filters every month. Doing so will ensure the furnace works properly without causing any heating problems.

Check the Pilot

Old furnace systems have a standing pilot light. A furnace system not producing heat is also due to pilot control problems. Check and confirm if the pilot light is out, and then turn off the gas valve and wait for at least five minutes.

If your furnace system has a reset button, hold a flame to the pilot gas tube while pushing the button for 30 seconds. Wait for a few minutes and repeat the process in case the pilot does not light. Depress the furnace reset button for 60 seconds to ensure the pilot is lit.

If it does not lit, the problem is in the ignition system or the thermocouple. Although you can replace these parts yourself, it is best to call a professional Southlake TX furnace repairs service. Air Repair Pros has qualified and skilled technicians who can fix problems with the furnace ignition system.

Clean the Flame Sensor

The main function of the flame sensor is to safeguard the heating system. It ensures the proper flowing of gas when there is a flame for ignition. A dirty or dusty flame sensor can cause your furnace not producing heat.

The flame sensor is a rod you can find near the back of the heating system. It is located near the burner. Turn off the power to the heating system before cleaning the sensor. A professional technician can remove the flame sensor from the furnace, clean it properly, and reattach it to restore the heating system’s power.

Contact Air Repair Pros

Air Repair Pros is a professional company with many years of experience in the HVAC industry. We have experts that deal with a furnace not producing heat. Our technicians are knowledgeable, skillful, experienced, and fast. Contact Southlake TX furnace repairs today!

Leave a Comment

Are You Sure
You Want To Leave?

You are about to leave the Air Repair Pros website, do you wish to continue?